The fibers are positioned in loose tubes that are made of high-modulus plastic and filled with tube gel. The tubes (and fillers) are stranded around a metallic central strength member to form a cable core. Then the core is filled with water blocking compound and covered with PE inner jacket. After the steel tape is longitudinally armored over the inner jacket, the cable is completed with a LSZH outer jacket.
Application：
Duct / Non Self-supporting Aerial Installation
Parameter：
| Counts | 2-30 | 32-36 | 38-60 | 62-72 | 74-96 | 98-120 | 122-144 | 146-216 | 218-288 |
| Max.fiber counts per tube | 6 | 6 | 12 | 12 | 12 | 12 | 12 | 12 | 12 |
| Units(Tubes or Fillers) | 6 | 6 | 5 | 6 | 8 | 10 | 12 | 18 | 24 |
| Cable Diameter（mm） | 12.1 | 12.1 | 12.4 | 12.6 | 14.0 | 15.4 | 16.6 | 16.8 | 18.7 |
| Weight（Kg/km） | 185 | 185 | 189 | 202 | 240 | 278 | 314 | 318 | 387 |
| Fiber Type | G652D G655 G657 50/125 62.5/125 |
| Tensile Strength（N） | Long/Short Term：1000/3000 |
| Crush Resistance（N/100mm） | Long/Short Term：1000/3000 |
| Bending Radius(mm) | Static/Dynamic：12.5D/25D |
| Temperature(℃) | Storage /Operation：-40℃~70℃ |
English
