All dielectric structure, resistant to electromagnetic interference
Small diameter , light weight, cost-effective, easy for stripping, splicing, simplified installation and maintenance

The cable is an ADSS, non-metallic cable using concentric core design. The cable utilizes aramid yarn as strength member. This extremely slim and low weight cable is suitable for a maximum span length of 60-170 meters. 
• It can be installed adjacent to power lines up to 120 kV.
• It can be installed without shutting off the power.
• Light weight and small diameter reducing the load caused by ice and wind and the load on towers and back-props.
• Good performance of tensile strength and temperature performance

• It can be installed without shutting off the power.
• Light weight and small diameter reducing the load caused by ice and wind and the load on towers and back-props.
• Good performance of tensile strength and temperature performance

The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the metallic strength member to form the cable core. An Aluminum tape(APL) is applied around the core, which is filled with the water-blocking compound. Then the cable core is covered with a PE inner jacket. After the steel tape is longitudinally armored over the inner jacket, the cable is completed with a PE outer jacket.
 

The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the non-metallic strength member （FRP) to form the cable core. Then the cable core is filled with the cable jelly to protect it from water penetration. Finally a PE jacket is extruded.
 

Fibers are housed in a loose tube that is made of high-modulus plastic and filled with tube filling compound. The water blocking tape is applied around the central tube. Then the tubes are armored with a corrugated steel tape (CST) logitudinally. Two parallel steel wires are embeded in the outer PE jacket.
 

FTTH drop fiber optic cable is a very good fiber optic solution to the last mile of the home. CROFC provides different numbers of FTTH drop cables from 1 core, 2 core, 4 core, 6 core, 8 core, and 12 core, etc.
 
Excellent bending performance and convinient geometries
Simple structure, light weight, high tensile strength and metal-free
Grooved design, easy to strip and splice, simplified installation and maintenance
Low smoke, zero halogen and flame retardant jacket, environment-friendly
 

● Good mechanical and temperature performance
● Steel wire as the central strength member
● Hydrolysis resistant loose tube
● Fiber gel ensures critical protection of fiber
● Specially designed stranded compact structure eliminating contraction of tubes
● Rugged, durable PE jacket protects against UV radiation, fungus etc.
● Crush resistance and flexibility
● Water-blocking measures :
- Loose tube gel-filled
- 100% cable filling compound
- APL moisture barrier

Self-supporting drop optical cable includes central optical fiber(s) with 2 parallel FRPs as the strength members placed on both sides,and an additional strength member(steel wire). Finally a LSZH jacket is extruded outside.